YouTube GOLD (S3 E7) FRESH MEAT! NEW MiNERS put "BiG JOHNSON" Deep in a GLORY HOLE for a BiG PAYDAY

YouTube GOLD (S3 E7) FRESH MEAT! NEW MiNERS put "BiG JOHNSON" Deep in a GLORY HOLE for a BiG PAYDAY



YouTube GOLD – It’s either FEAST or FAMINE.. and this week WE FEAST! An Unprecedented crew of TEN CREW MEMBERS means that all of the Gold Mining Equipment is in FuLL GEAR.. and we are moving pay than ever BEFORE. I am SO HAPPY that I have been preparing and planning for a huge mine site and bring in so much equipment. The Wheel Loaders, the excavators and the Bulldozers were all pushing dirt while the Volvo Rock trucks where hauling the pay layer to the dual plants. “Little Red” – the original Wash Plant has a lot of conveyors .. but can move a lot of material done the 3 sluices. (Viewers have asked, so here’ s answer: my Sunglasses are Oakley Clifden Prizm Snow Torch 56mm :

The GREEN GOLD FOX USA OMNI-FOX Wash plant and Trommel is insane – and the spray bars wash all the rocks super clean, leaving ALL of the gold caught in the miners moss and nugget traps. Any flakes, they wash down in the GOLD HOG mats. I love this combo.

Special shoutout to Wes for driving in from EDMONTON (a city North of us by 4 hours), for coming down to check out the mine site. Also, thanks to Tyler, Aaron, and Matt, Cam, Sluicebox Steve, Krazy Joe, Lyle, and Kevin for coming by the studio to help put on the Worlds Most Crazy Radio Control Hobby Gold Mining show on YouTube!

For those who are interested in the Gold Mining hobby/ business – I gathered some helpful links for you below:

– Gold Trommels and Sluice Box!

BATTERY BOX w/ Volt Meter for RV Battery:

GOLD WHEEL- Desert Fox Automatic Gold Panning Machine (Blue):

11 pc Prospecting-Mining-Panning Kit- 2- Classifiers 3 Gold Pans,+ MORE!!

Goldn Gold Paydirt Eureka Panning Pay Dirt Bag – Gold Prospecting Concentrate : by GoldnEmpire:

Mammoth ‘Troy Ounce Nugget Hunt’ – Gold Nugget Paydirt Panning Concentrate Pay Dirt Bag – Gold Prospecting
by Mammoth Paydirt:

2 lb California Paydirt Panning Gold Nugget Bag
by mikesgoldpaydirt:

As a side note..

For those who are new viewers to our YouTube GOLD show – know this: “YouTube GOLD” is a #Parody series based around the GOLD Shows of TV that we all know and love. #GoldRush YukonGold, BeringSeaGold all of these are shows that my friend and family enjoy seeing!

The true secret of this show – is nothing you see is “real”, Most everything is staged, such as scenarios, acting out our characters, comedy.. etc.. In fact, we are not even working for efficiency, as we are a group of hobbyists who are more interested in entertaining our audience and using super cool radio control hobby equipment.. than “actually getting gold”. A few of the things that are not staged is our friendship, the laughter, camaraderie, and of course.. THE GOLD! (Yes, it’s real pay dirt). The true Gold is the experience we get as friends, what we hope the viewers get watching a group of goofballs entertain them with some very cool toys. One mans hobby, is another’s entertainment on YouTube!

Tamiya Ford AeroMax Semi Truck Kit:

Tamiya King Hauler Kit (Short Truck) :

(Pre-Painted) Tamiya GRAND HAULER (Longer than the King) – Matte Black Edition

Tamiya Freightliner Cascadia Evolution Semi Truck Kit:

Ess-Dual Sound Kit:

Hobbywing QuickRun Crawler ESC:
Noble NB4 Pistol Grip Radio –
Venom Pro Duo Lipo Charger:
GensAce Lipo Battery 2s 4000 mah:
DerBlue 2pcs Fireproof Lipo Battery Bag:

Tamiya Flatbed Semi Trailer:
Tamiya 3 Axle Reefer Trailer Kit:

SUBSCRiBE & “Ring the Bell” ►

MISSED an RC ADVENTURES film?! CHECK HERE:

EVEN MORE RCSparks Videos:

“1 Million Views Club”:

RCSPARKS Shirts & MERCH:

RC ADVENTURES™/ RCSparks Studio™ © 2020 Medic Media Productions Inc. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever – including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world — is strictly prohibited without the prior written consent of Medic Media Productions Inc.
cheap semi truck tires

Wheels & Tires! What Good Would A Model Be Without Them? How Diecast Cars & Trucks Are Made – Part 3

Wheels & Tires! What Good Would A Model Be Without Them? How Diecast Cars & Trucks Are Made – Part 3



Wheels & Tires! What Good Would A Model Be Without Them How Diecast Cars And Trucks Are Made – Part 3
Get my FREE Report on the Key Benefits of Resin Vs. Diecast here:

Connect with me on social media!
Facebook:
Twitter:
Instagram:
Facebook Group:
Podcast:

In this video series we talked about the process used to make one diecast metal car or truck.

Part one ended with the painting process.

In Part two we talked about making plastic parts using a plastic injection machine. We also talked about the Vacuum Metalizing Process.

In Part three of this video series we are going to talk about making wheels and tires.

Let’s begin our discussion on how wheels and tires are made. In mass productions the wheels and tires are molded on a plastic injection machine.

Mass produced model cars and trucks have their wheels and tires as part of the plastic cast. Most of the inexpensive diecast cars and trucks use this kind of tire and wheel combination. Plastic tires are standard on Hot Wheels models. Also Ertl Trucks of the World series trucks used plastic wheels and tires. The mold has the wheel and tire carved into the mold. Therefore, the wheel and tire come out of the mold as one cast. This is the least expensive way to make a wheel and tire for a diecast model vehicle. It is cost effective because it removes one step in the assembly process.

Other more expensive cars and trucks require a separate wheel and tire. Most common are plastic wheels and rubber tires.

To make plastic wheels the molten plastic is injection into a multi cavity mold. If the wheels need to be painted, they are sent to the air brush department.

If chrome or gold plating is required the wheels are put through the Vacuum Metalizing Process. If you will remember from my last video the Vacuum Metalizing Process is a process where metal is heated in a vacuum chamber and then vaporized, The vaporized metal is plated on the lacquered wheels. And presto! The wheels are chrome or gold plated.

The tires are made much like the wheels in a plastic injection machine. The tire mold has many cavities thereby allowing several tires to be made at one time.

A rubber like material is injected into the mold. When the tires are cured they are ejected from the mold and dropped into a bin. If nothing further is to be done to the tire they are sent to storage or assembly.

However, if a name is required on the tire, they are sent to the pad printing department where each tire receives its name.

Just think what a run of 1,000 18 wheel tractor trailer requires. 5,000 axles, 18,000 wheels and 18,000 tires not counting spare wheels and tires. Each wheel and tire assembly have to be assembled by hand or with the aid of a machine.

Its little wonder the inexpensive cars and trucks have their wheels and tires cast as one part. This method saves time and time is money.

A word for the hobbyist who wants to restore a model that has lost a wheel and tire. Individual wheels can be resin cast by making a silicone mold of the wheel and casting it out of resin. The tire can be made the same way by making a silicone mold of an existing tire and casting the tire out of a urethane rubber liquid.

Summary

We have covered the machines needed to make one diecast car or truck. They ranged from a CNC mold cutting machine, plastic injection machine, pad printer, and vacuum chamber to plate our wheels. To name a few. We’re slowly getting the idea that many people and skills are involved in creating one model car or truck. Let’s not forget the huge sum of money the machines cost, and let’s not forget the cost of the molds. Steel molds costs anywhere from several thousands of dollars to hundreds of thousands of dollars. Machines cost tens of thousands of dollars into the millions of dollars. In a later video we will take up the cost of building a model car or truck.

In our next video we will explore the subject of how window glass, head lights, taillights, marker lights, and light bars are created and colored.

Toy Talk is hosted by Logan Skeele Founder of Advantage Diecast, LLC

#diecasttrucks #wheelsandtires #toytalk
cheap semi truck tires

Inspecting Truck tyres for abnormal wear. – Kansas City Trailer Repair – By USTrailer.com

Inspecting Truck tyres for abnormal wear.

Check out US Trailer Rental

Capture





Check out US Trailer Rental

Capture



Kevin Wood owner of Darra Tyres inspects truck tyres for uneven wear.

Kevin inspects truck tyres for abnormal wear. The truck in the video is actually a new truck that has come in after 500kms for its first settling in check up. These tyres are straight from the manufacturer and already are showing signs of abnormal wear. Luckily its been caught soon enough that not much damage is done.

Darra Tyres recommends that you check your tyre pressure weekly, especially if your using the vehicle for commercial purposes. Passenger should be weekly but realistically monthly is acceptable, however the concern is that most people never check until its too late.

Call Kevin and the Team on 07 3375 3366 or

Darra Tyres is an independent tyre store that specialises in Industrial tyres, commercial tyres, passenger tyres, forklift tyres, earthmoving tyres, performance tyres.

source


Check out US Trailer Rental

Capture