How to Fix a Flat Using a Tire Plug to Repair a Puncture on a Jeep Truck or Car with Ease

How to Fix a Flat Using a Tire Plug to Repair a Puncture on a Jeep Truck or Car with Ease



Tire Plug Repair Kit:
Air Compressor Mount:
On Board Air Video:
Come visit us at:

Whether it’s caused by a nail, screw, renegade branch or other sharp and pointy object, a flat tire caused by a puncture is something that most of us have to deal with at some point and time especially if you take your Jeep off road. And, while it can be a bummer, it is at least something that can be fixed quickly and with relative ease. The best part is, so long as the hole is located on the tread, the repair will be good enough that you won’t have to think about again. In this short video, you’ll get to see just how easy it is to locate a leak and how to fix it yourself using a tire plug.
semi truck air compressor repair

The EPA is Deleting the Delete

The EPA is Deleting the Delete



On this episode I detail the new fine that was handed out by the EPA to Perfomance Diesel Inc for 1.1 million dollars and what that means for the tuning industry as a whole. The EPA has also started a task force called the National Compliance Initiative: Stopping Aftermarket Defeat Devices for Vehicles and Engines

The sole purpose of this task force is: This NCI will focus on stopping the manufacture, sale, and installation of defeat devices on vehicles and engines used on public roads as well as on nonroad vehicles and engines.

So, basically any tuning on your vehicle (gas or diesel) must be 50 state legal. It does not matter if the vehicle in question is an offroad or race vehicle. It still must remain emissions compliant. The way all of this information is worded it does not matter if your vehicle is gas or diesel. The factory tuning or 50 state (CARB) tuning must be used in the vehicle. Where this situation gets interesting is when you look at truck and tractor pulls. Most of those engines are some type of Cummins, Powerstroke, or Duramax. Even competition vehicles cannot be deleted or roll coal.

You can read the information right off the EPA’s website here:

Questions? Shoot me an email at repairgeek365@gmail.com

Disclaimer:
The information, demonstration and any content contained in this video is for informational purposes only. The user Repair Geek makes no warranty, express or implied, regarding the effectiveness or safety of the contents of this video. In no way should the contents of the video, including the tools used, be repeated or tried by anyone. Viewers should only seek the help of a trained professional located at a licensed auto repair shop for any fix, modification, alteration, or any change to their vehicle. Repair Geek shall not be liable for any injury, damage, or loss to any person or property that may result from use of the tools, equipment, or any content contained in this video. In addition, there is no way to guarantee that the video is not altered or modified or is not in the final form submitted by Repair Geek and therefore, Repair Geek does not warrant that the video is unaltered or not modified. The links on this video to products are for informational purposes only and in no way are an endorsement of the safety or effectiveness of the particular product. Viewers understand that anything contained in this video or linked to or from this video is the sole responsibility of the viewer and in no way provides an express or implied warranty as to the safety or effectiveness of any linked tool, product, or video. Therefore, viewer agrees to release, waive, and discharge Repair Geek or anyone affiliated with Repair Geek, from any and all liability, claims, demands, actions, and causes of action whatsoever arising out of or related to any loss, damage, or injury, including death, that may be sustained by the viewer, or to any property belonging to viewer, regardless of whether the loss is linked to the use of the contents of this video, or otherwise and regardless of whether such liability arises in tort, contract, strict liability, or otherwise, to the fullest extent allowed by law.
semi truck repair

UNITE U237A Semi-automatic Tilt Back Tower Motorcycle & Automotive Tire Changer

UNITE U237A Semi-automatic Tilt Back Tower Motorcycle & Automotive Tire Changer



U-237A is a slightly stripped-down version that still performs rapid tire changes. Commonly found in general repair shops that see a wide range of tires, such as racing and light truck tires.

U-237 SEMI-AUTOMATIC TILT BACK TOWER TIRE CHANGER
Product Code: U-237 semi-automatic tilt back tower
Semi-Automatic tilt back tire changer with dual assist arm for tires with a rim from 12″ to 26″ (max. wheel diameter 1143 mm./45″, max. wheel width 406mm./16″). One dual assist arm helps while mounting/demounting tire. Suggested for low-mid volume tire-shops, garages and repair shops.

Features:

1. 037 help arm: The right side help arm provides 2 points pressing assistance enables an easy operation for low profile tyres.

2. Large 26” turntable.

3. Four angles directional tyre pressing shovel.
See and purchase this changer at

-~-~~-~~~-~~-~-
Please watch: “Car Lift Installing Scissor Lift -Unite U-C45 Wheel Alignment Scissor Lift with Rolling Jacks”

-~-~~-~~~-~~-~-
semi tire repair

Truckparts1919: How do you retread a tyre

Truckparts1919: How do you retread a tyre



See the process of retreading tyres.

About TruckParts1919.com:

TruckParts1919.com B.V. is a independent company that delivers worldwide a total program of new and used parts for commercial vehicles, trucks, trailers, semi-trailers and vans. We can deliver every part like brake parts, complete gearboxes, gearbox parts, complete engines, engine parts, headlights, starters, alternators, clutch kits, exhausts, silencers, compressors, injectors, wheel bearings, oil pumps, body parts, parts for trailers etc.

Music: bensound.com
commercial semi truck tire repair

SEMI TRUCKS DRIVING FAILS BAD DRIVERS USA, CANADA ROAD RAGE IN AMERICA US TRAILER RENTAL AND STO

SEMI TRUCKS DRIVING FAILS   BAD DRIVERS USA, CANADA   ROAD RAGE IN AMERICA US TRAILER RENTAL AND STO



BEST OF TRUCKS OVERTURNING, SPECTACULAR TRUCK CRASH COMPILATION
Uploaded as educational video.

Semi Trucks crashes and Accidents. Compilation #7.

Videos featured in the following compilation are intended for criticism, educational and journalistic purposes.
Take this video as a learning tool, watch and do NOT repeat!

Take these videos as a learning tool. Always obey the laws of the road and driving conditions.
Copyright issue? Send me a message and we’ll get it resolved .

Why is the bridge so low?
This train trestle is about 100 years old. At the time when it was built, there were no standards for minimum clearance.

How often do trucks crash into the bridge?
On average, about once a month a truck gets visibly damaged at the bridge. However, every day I see trucks that trip the overheight warning lights, stop and turn into the side street.

Why don’t they fix it?
Depends on who “they” are and on what “fix” means. The North Carolina Railroad Company owns the train trestle, and their concern is primarily with keeping the trains running and keeping them running safely. So their concern is mainly with reducing the impact of the truck crashes on the actual structure of the train trestle. As far as they are concerned, they solved that problem by installing the crash beam.
The city of Durham has installed “low clearance” signs on each of the 3 blocks leading up to the trestle (Gregson is a one-way road). There is an “overheight when flashing” sign with flashing lights that are triggered by vehicles that are too tall. Several blocks ahead of the trestle the speed limit is 25 MPH. The folks from the city planning department said that they made an effort to prevent accidents.
The North Carolina Dept. of Transportation maintains the road, but not the signage. I suspect they have much bigger problems to deal with statewide than this bridge.

Is the clearance signage accurate?
The clearance signage displays a maximum safe clearance – and yes, in that sense it is accurate. The actual clearance of the crash beam right in front of the trestle is 11 feet 10.8 inches, which gives it a 2.8 inch safety margin. The MUTCD allows for a maximum of 3 inches difference between the signage and the actual clearance.

For the convenience of our metric-only audience, here are the measurements we’re talking about in meters:
11foot8 (11 feet 8 inches) = 3.556 meters
11 feet 10.8 inches = 3.627 meters
Safety margin: 7.1 cm (at the crest of the road)

Can’t the road be lowered?
That would be prohibitively expensive because a sewer main runs just a few feet below the road bed. That sewer main also dates back about a hundred years and, again, at the time there were no real standards for minimum clearance for railroad underpasses.

Can’t the bridge be raised?
Here, too, the question is who would want to pay the millions of dollars to raise the tracks a couple of feet? To accomplish this, the grade of the tracks would have to changed on both sides of the trestle, probably for several miles. That would require rebuilding all trestles in Durham. And NS would have to shut down this busy track for months. I don’t think they are interested in that idea.

Is the signage inadequate?
The signage is pretty good. Large signs alert driver to the low clearance several blocks before the bridge. Over height vehicles trip a light switch that turns on flashing warning lights.right at the bridge.

Should there be more signage?
It’s hard to see how more “low-clearance” signs will significantly improve the situation. But maybe a different kind of signage would get the driver’s attention.

Could they install a low-clearance bar?
A low clearance bar is a bar suspended by chains ahead of the bridge. Overweight vehicles hit that bar first and the noise alerts the driver to to the problem. I understand that this approach has been successful in other places, but it’s not practical here. There are many over height trucks that have to be able to drive right up to the bridge and turn onto Peabody St. in order to deliver supplies to several restaurants. Making Peabody St inaccessible from Gregson St would make the restaurant owners and the delivery drivers very unhappy.

Why are they using yellow flashing lights?
Warning lights have to be yellow according to the NC traffic laws.

Are the drivers stupid?
No idea. They certainly seem distracted and the rental truck drivers are also probably inexperienced.

DISCLAIMER:
Under Section 107 of the Copyright Act 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing.”

US Trailer US Trailer We are a Missouri licensed Trailer Rental, Sales, Service and Repair company. 24 hour road side service available. 816-795-8484 USTrailer.com
semi truck road service

Heavy Hauling Saco, ME | Ray's Truck Service

Heavy Hauling Saco, ME | Ray's Truck Service



Ray’s Truck Service provides 24hr car and heavy truck towing, heavy duty recovery, mobile truck repair, auto and truck repair, heavy hauling and roadside assistance in Saco, ME and along the I-95 Maine Turnpike in Southern Maine between Portland and Portsmouth.

Call 207-282-0059 for 24hr towing, heavy recovery and heavy hauling services.

24 hr semi truck repair