How to adjust the Wheel Bearing on a Trailer Axle – Kansas City Trailer Repair – By USTrailer.com

How to adjust the Wheel Bearing on a Trailer Axle

Check out US Trailer Rental

Capture





Check out US Trailer Rental

Capture



(Always Remember: To prevent serious eye injury always wear safe eye protection when performing vehicle maintenance or service and follow recommended safety procedures.)

To adjust a wheel bearing on a trailer axle, first torque the inner adjusting nut to 200 ft. lbs. to seat the bearing rollers and the wheel seal. Always rotate the hub while torqueing the nut. Torque the adjusting nut to 200 ft. lbs. while rotating the hub. Then back the nut off one turn. Now, torque the nut to 50 ft. lbs. then back it off 1/4 turn. Install the retaining hardware and torque the jam nut to the proper specifications. For nuts less than 2 5/8″ 200-300 ft. lbs. and nuts greater than 2 5/8″ 300-400 ft. lbs, install the dial indicator and check in play. In play should be within 1 — 5000ths of an inch. If the in play is not within specs re-adjust the inner nut to obtain the correct in play.

source


Check out US Trailer Rental

Capture

Pirtek – On-Site repair 24 hours – Kansas City Trailer Repair – By USTrailer.com

Pirtek - On-Site repair 24 hours

Check out US Trailer Rental

Capture





Check out US Trailer Rental

Capture



When a machine breaks down on-site, significant costs are incurred. Pirtek promises quick help – with its Sprinter work shop vans. Hydraulic service, hoses, pipe fittings & couplings. (Watch on myvan.com: “The mobile 24h-hydraulic service”.)

More MYVAN:
——————

Subscribe:

Visit our channel:

facebook:

Find us on the web:

——————

source


Check out US Trailer Rental

Capture