If your bearings, housing, or spindle are not messed up then just replace the regulator and points! This has worked for me at least 6 or 7 times. I hope this works as well for you guys as it has for me!
I pad $4500….
I decided to make the purchase on a Dihatzu Hijet (CORRECTION does not translates to midget in Japanese) Climber Mini-truck, this one is a 1992, 7th Gen, S83P, 660cc Minitruck. The “climber” means it has rear axle lock. Amir has about 60 units in stock, he was very helpful.
Researching online I did find l lot of information, but Amir explains a LOT more than I knew, he has been in the business for 15 years. Plus if Bubbles in Trailer Park Boys has one, it HAS to be cool!
Don’t forget you’re buying a used vehicle, check it all out, they’re over 25 years old! Some are in much better shape than others. Check for leaks, CV boots ripped, Loose suspension, Clutch slippage, clunks etc. Just like any used vehicle
660cc 4 vavle 3 cyl engine 48-53hp carburated
weight: 1500 lbs
length 10’8″ (128″). width 4’6″ (54″) w/o mirrors. Height 5’10” (70″)
Load capacity 800 lbs
I purchased mine at Boeki USA, www.boekiusa.com has their updated inventory. Ask for Amir and tell them MOTOCHEEZ sent you!
East coast 212-729-8293
West coast 360-990-7770
I know there may be other videos of this.. but this is my Cheezy style!
More info (Wikipedia):
The Daihatsu Hijet (Japanese: ダイハツハイゼット) is a cabover microvan and pickup truck produced and sold by the Japanese automaker Daihatsu since 1960. Despite the similarities between the Hijet name and Toyota’s naming scheme for its trucks and vans (Hiace and Hilux), the name “Hijet” has been in use for Daihatsu’s Kei trucks and Microvans since 1960, over two decades before Toyota took control. “Hijet”, when transliterated into Japanese, is very similar to “Midget”, one of Daihatsu’s other mini-trucks. The Hijet competes in Japan with the Honda Acty, Subaru Sambar, Mitsubishi Minicab, Suzuki Carry and the Nissan Clipper.
Due to changing products, links, etc, If you want the most recent product links (if these are no good), go to www.motocheez.com and click the section you’re looking for (upper right) and scroll down the page for the item.
This keeps the links for all the parts more accurate. These I use and install on ALL my videos. I do not sell any of the items listed. (except T-shirts and key tags.. so you buy now!)
Thanks you for watching, PLEASE subscribe!
▽ Follow MotoCheez on….
Memes etc: troll,
Music clips: short people, oompa loompa
Movie clips: Trailer Park Boys
Finally made a new video. Thanks for all the support!!!
Rema Tip Top Regroover
Check out where I get my supplies.
Mack Service Database
Volvo Service Database
Replacing a water pump and coolant expansion tank on my 2011 CXU613 Mack Pinnacle with MP8 Engine.
off road fun with studded tires Part I 4×4 suv Toyota RAV4 with 2 studded tires off roading in to the Mud bogging see the part II with Suzuki Jimny recovery
follow me in Facebook page
and Subscribe to my channel and see more HD Video off road , enduro ,4×4 ,adventures ,race ,competition,rc,atv,quad,events ,
Review ,epic and big fail,snow 4wd and many more motosport video in high quality HD video and photos
PROMITHEAS YPERION OFF ROAD EXTREME FILMS
BHP’s Mooka Ore Car Repair Shop (OCRS) is a high-tech, semi-automated production line, designed to safely conduct highly repetitive activities that are involved in maintenance of ore cars.
Mooka OCRS took on the challenge of achieving a more inclusive workplace. As part of our push for continuous improvement, we redesigned the OCRS to reduce risk from activities such as shunting and overhead crane use. This not only made the workplace safer, it also made it possible for a diverse pool of talent from the local community to participate in our workforce, without requiring specialist technical qualifications.